Profile

The deposit welding system is especially designed for the mould industry, and it is applied to repair of precision moulds, for example, digital products, handsets, toys, autos, and motors mould making and modeling. The mould repair can make full use of the original moulds, which will greatly reduce the production cost, and improve the working efficiency. The technology can also be applied to modification of mould design or size, thus reducing the development cycle of the product.

Applicable materials and industries

 

It is applicable to metallic materials such as cold working high alloy steel, hot forging high alloy steel, nickel tool steel, high grade steel, copper alloy, beryllium steel, and high flexibility aluminum alloy. The remote controller or the touch operation panel can be used to select the laser output power, frequency, pulse width and other parameters. The moving speed of the workbench can be set to manipulate the workbench moving, so that the welding parameters match the welding requirements, and thus producing optimal effect of smooth welding joints and points.

Advantages

 

The product is customized for the moulding industry by introducing German technology, with unique structural design, and applicable to repair of large, medium and small-sized moulds. 
1. The ceramic focusing cavity is corrosion and high temperature resistant, and the service life is 8 to 10 years, while the service life of the xenon lamp is over 8 million times.
2. World-leading automatic light shielding system is employed to remove stimulation of light on eyes during operation.
3. The laser head can be turned for 360 degrees, and the whole optical path can be turned 360 degrees too, up and down by motor,front and after adjustable, especially suitable for repair of large, medium and small-sized moulds.
4. Intelligent remote controllers are employed for adjusting parameters, with simple and convenient operation.
5. The workbench can be adjusted up and down with three-dimensional moving.
6. The light spots can be adjusted in size

Models	BMI 180	BMI 200
Machine Size (mm)	1170x590x1250	880x350x1700
Worktable Size(mm)	500x350	500x350
Travel Path(X, Y, Z)	X=300mm ,Y=200mm,Manually adjust the X and Y Axis .Electrically adjust Z Axis.
Worktable Bearing Load	200KG
Machine Weight	300kg	500kg
Power Supply	220V±10%/50Hz    or 380V±10%/50Hz
Laser Parameters
Laser Type	Nd:YAG Pulsed
Laser Spot	0.2-0.3mm
Wavelength	1064nm
Pulse Width	0.5-25ms
Max. Average Power	180W	200W
Pulse Frequency	0-20Hz
Focusing Size	80mm/100mm/120mm or optional
Chiller	Water Cooling System
Observing System	Microscope (360°Rotating )
Protective Gas	Argon
Solder Parameter
Welding Wire Dimension	0.1-0.8mm